+420 733 643 826
Print white or coloured functional parts
in a fraction of the time
3D Printer for coloured parts
HP JET FUSION
500
3D Printer for coloured parts HP JET FUSION
BENEFITS
- Rapid production of functional prototypes and short series production
- Functional design in unlimited colour
- Easy operation
- No waste, all unused material is reused
FULLY INTEGRATED AND COMPACT
PRINTING SOLUTION
INTUITIVE USER
INTERFACE
AUTOMATIC MIXING,
FILLING AND RECYCLING
OF BUILD MATERIAL
SUITABLE FOR SMALL
AND MEDIUM DEVELOPER
TEAMS, DESIGN STUDIOS AND SCHOOLS
WHITE OR FULL COLOUR
PRINTING ACCORDING
TO YOUR NEED
18H
FROM INITATION TO REMOVAL
OF PARTS FROM BUILD AREA
10s
PRINT TIME OF LAYER
REGARDLESS OF
COMPLEXITY OF PARTS
80%
RECYCLED POWDER
AND 20% FRESH MATERIAL
FOR QUALITY PRINTING
ORDER A 3D PRINTED
SAMPLE PART
HP JET FUSION 540 AND 580
3D PRINTERS
The HP Jet Fusion 540 and 580 3D printers ensure accurate printing of parts with fine and elaborate details. They produce single-colour and full-colour plastic parts from tough, mechanically and chemically resistant PA 12 material.
Unlike the highly productive HP 4200 3D printer, the entire process of material preparation, 3D printing and subsequent cooling, removal and recycling of unused material takes place in a single device. Less than a day turnaround time from entering data to removing the finished parts.
You can create a design, test it, and build multiple variations in a matter of hours. Operation of the device is very simple and does not require any deep technical knowledge.
The HP Jet Fusion 540 3D printer is for users for whom fully functional white plastic parts are enough and do not need full-colour parts. The HP Jet Fusion 580 3D printer, on the other hand, is a revolutionary application of ink fused directly into the surface of a plastic print, enabling a completely new use of 3D printing in the development and production of new products and services.
Both 3D printers are suitable for designers, constructors and manufacturers who want to take advantage of the smaller print space and the possibilities offered by white-only or full-colour 3D printing.|
Detailed information for the HP Jet Fusion 540 3D printer (white printing) |
Download |
|
Detailed information for the HP Jet Fusion 580 3D printer (colour printing) |
Download |
EXAMPLE APPLICATIONS
Multi Jet Fusion 3D printing technology enables the rapid introduction of new products into production. You can create several prototype variants on one device, in the time you would spend on a single printer printing a single part. In addition, you can produce a fully functional and mechanically resistant product, either in white or colour variants.
Hewlett Packard technology replaces other additive technologies as well as conventional plastic prototyping such as machining.
SEE HOW HP JET FUSION 3D PRINTING IS USED IN CZECH AND INTERNATIONAL COMPANIES
Photo gallery
HP Jet Fusion 540 and 580 3D printers produce parts with fine thermoplastic details and optimal mechanical properties.
HP 3D PRINTER BUILD MATERIALS
In terms of further cost savings, the HP Open Material Platform is a revolutionary innovation in the field of 3D printing – allowing for flexible adoption of new materials and healthy competition among several manufacturers. The costs of acquiring build materials will gradually decrease and at the same time quality will increase.
BUILD MATERIALS FOR HP JET FUSION 540 AND 580 3D PRINTERS
|
HP 3D High Reusability CB PA 12 Strong thermoplastic for functional prototypes and final parts with high density and optimal technical properties. Enables full colour printing. |
CERTIFICATES AND
OTHER INFORMATION
Hewlett Packard is committed to providing information on the safety of 3D printing technology and the technical and other characteristics of printed parts. Contact us, if you do not find the information you need here.
BIOCOMPATIBILITY OF BUILD MATERIALS AND PRINTED PARTS
|
Declaration of biocompatibility of CB PA 12 material |
Download |
|
Intact Skin Surface Devices Statement |
Download |
|
Indoor Air Quality Statement |
Download |
SOFTWARE
If you want to realise the full potential of 3D printing, you need quality 3D modelling. Today's software solutions can not only create 3D models, resize and convert to a suitable format, but also provide tools such as topologically optimization and full-colour texture.
Before modelling for 3D printing on HP Multi Jet Fusion technology, it is a good idea to familiarize yourself with a few basic guidelines.
Various software can be used to create a 3D model for 3D printing, including the most commonly used CAD software. If you work with a CAD program, you can easily use it to prepare data for 3D printing.
FINANCING FOR
PURCHASE OR OPERATIONS
We offer solutions for financing HP Multi Jet Fusion technologies. We have an experienced finance team that will recommend a suitable financial offer, an attractive grant program, or a combination of both.
POST PROCESSING
All powder-based 3D printing technology, including HP Multi Jet Fusion, require some post-processing of the printed parts. Namely, the removal of residual, unbonded build material from the surface of the parts. This is best achieved by sand-blasting or with a fine mixture of plastic powder. Other processing, can be, for example, dyeing or applying a coating.
We offer functional and cost effective variants of post-processing equipment.
